Home > Knowledge > Content
Cutting sheet industry Description
- May 07, 2018 -

Cutting discs are widely used in machinery, automobile, shipbuilding, metallurgy, chemical industry, can also be used in modern residential, iron decoration and equipment repair plant. Glass fiber and resin as enhanced binding material with high tensile, impact and flexural strength, is widely used in ordinary steel, stainless steel and non-metallic material under production, excellent material, exquisite craftsmanship ensures that different materials high cutting efficiency of the workpiece and the best economic results.


Small incision, can be installed on an electric grinder use large-sized cut pieces, can be installed in profile cutting machine. A cutting slices thick-proof resin grinding wheel, it is not easy to crack explosion in the use of high-strength, both for a variety of workpiece grinding, polishing, but also for cutting the workpiece or material, the thickness of the wheel body 3 to 10 layers constituting the elastic layer, each layer thickness is between 5 ~ 6mm, the layers of the abrasive layer, and the radial distribution of the reinforcing ribs, the wheel outer diameter Φ200 ~ Φ400mm, a thickness of 15 ~ 60mm, the pore size of Φ25 ~ 32mm; elastic layer is a glass fiber or nylon fiber filament sheet, the overall stability and strength improved, noise reduction, dust reduction, security enhancements, greatly improved wear resistance, low cost, simple structure, thus It has broad application prospects.

 

Cut pieces are made of high strength resin and preferably a special abrasive, they allow the linear velocity, are more than 50 m / sec, easy embrittlement; cutting sharp, cutting heat is extremely small, shallow sample heat-affected layer, thereby minimizing interference.

 

Superhard diamond cutting discs grinding temperature is low, can greatly improve the surface quality of the workpiece, avoid parts cracks, burns, organizational changes and other ills; also greatly improve the stress status of parts machined surface is conducive to life of parts It extended, so that the overall economic indicators improved. Superhard cutting blades less wear, long life cycle, grinding ratio, under conditions of fair use, get a good economic results, especially with ordinary abrasive material difficult to process, the better the economy. In fact, cutting tablet hardness are the main characteristics of the decision abrasive properties.

 

Superabrasive itself has a very high hardness, it can process a variety of high hardness materials, particularly abrasive materials are difficult to process ordinary. For example, diamond abrasive machining of carbide and ceramics, agate, optical glass, semiconductor materials, stone, concrete and other non-metallic materials and non-ferrous metals; with CBN abrasive machining tool steel, tool steel, stainless steel, heat-resistant alloys, in particular high-speed processing of high vanadium steel and other ferrous metals, can be processed to obtain satisfactory results.


Яндекс.Метрика